Incremental Refresh in Power BI, Part 3: Best Practices for Large Semantic Models

Incremental Refresh in Power BI, Best Practices for Large Semantic Models

In the two previous posts of the Incremental Refresh in Power BI series, we have learned what incremental refresh is, how to implement it, and best practices on how to safely publish the semantic model changes to Microsoft Fabric (aka Power BI Service). This post focuses on a couple of more best practices in implementing incremental refresh on large semantic models in Power BI.

Note

Since May 2023 that Microsoft announced Microsoft Fabric for the first time, Power BI is a part of Microsoft Fabric. Hence, we use the term Microsoft Fabric throughout this post to refer to Power BI or Power BI Service.

The Problem

Implementing incremental refresh on Power BI is usually straightforward if we carefully follow the implementation steps. However in some real-world scenarios, following the implementation steps is not enough. In different parts of my latest book, Expert Data Modeling with Power BI, 2’nd Edition, I emphasis the fact that understanding business requirements is the key to every single development project and data modelling is no different. Let me explain it more in the context of incremental data refresh implementation.

Let’s say we followed all the required implementation steps and we also followed the deployment best practices and everything runs pretty good in our development environment; the first data refresh takes longer, we we expected, all the partitions are also created and everything looks fine. So, we deploy the solution to production environment and refresh the semantic model. Our production data source has substantially larger data than the development data source. So the data refresh takes way too long. We wait a couple of hours and leave it to run overnight. The next day we find out that the first refresh failed. Some of the possibilities that lead the first data refresh to fail are Timeout, Out of resources, or Out of memory errors. This can happen regardless of your licensing plan, even on Power BI Premium capacities.

Another issue you may face usually happens during development. Many development teams try to keep their development data source’s size as close as possible to their production data source. And… NO, I am NOT suggesting using the production data source for development. Anyway, you may be tempted to do so. You set one month’s worth of data using the RangeStart and RangeEnd parameters just to find out that the data source actually has hundreds of millions of rows in a month. Now, your PBIX file on your local machine is way too large so you cannot even save it on your local machine.

This post provides some best practices. Some of the practices this post focuses on require implementation. To keep this post at an optimal length, I save the implementations for future posts. With that in mind, let’s begin.

Best Practices

So far, we have scratched the surface of some common challenges that we may face if we do not pay attention to the requirements and the size of the data being loaded into the data model. The good news is that this post explores a couple of good practices to guarantee smoother and more controlled implementation avoiding the data refresh issues as much as possible. Indeed, there might still be cases where we follow all best practices and we still face challenges.

Note

While implementing incremental refresh is available in Power BI Pro semantic models, but the restrictions on parallelism and lack of XMLA endpoint might be a deal breaker in many scenarios. So many of the techniques and best practices discussed in this post require a premium semantic model backed by either Premium Per User (PPU), Power BI Capacity (P/A/EM) or Fabric Capacity.

The next few sections explain some best practices to mitigate the risks of facing difficult challenges down the road.

Practice 1: Investigate the data source in terms of its complexity and size

This one is easy; not really. It is necessary to know what kind of beast we are dealing with. If you have access to the pre-production data source or to the production, it is good to know how much data will be loaded into the semantic model. Let’s say the source table contains 400 million rows of data for the past 2 years. A quick math suggests that on average we will have more than 16 million rows per month. While these are just hypothetical numbers, you may have even larger data sources. So having some data source size and growth estimation is always helpful for taking the next steps more thoroughly.

Practice 2: Keep the date range between the RangeStart and RangeEnd small

Continuing from the previous practice, if we deal with fairly large data sources, then waiting for millions of rows to be loaded into the data model at development time doesn’t make too much sense. So depending on the numbers you get from the previous point, select a date range that is small enough to let you easily continue with your development without needing to wait a long time to load the data into the model with every single change in the Power Query layer. Remember, the date range selected between the RangeStart and RangeEnd does NOT affect the creation of the partition on Microsoft Fabric after publishing. So there wouldn’t be any issues if you chose the values of the RangeStart and RangeEnd to be on the same day or even at the exact same time. One important point to remember is that we cannot change the values of the RangeStart and RangeEnd parameters after publishing the model to Microsoft Fabric.

Continue reading “Incremental Refresh in Power BI, Part 3: Best Practices for Large Semantic Models”

Incremental Refresh in Power BI, Part 1: Implementation in Power BI Desktop

Incremental-Refresh-in-Power-BI-Part-1-Implementation-in-Power-BI-Desktop

Incremental refresh, or IR, refers to loading the data incrementally, which has been around in the world of ETL for data warehousing for a long time. Let us discuss incremental refresh (or incremental data loading) in a simple language to better understand how it works.

From a data movement standpoint, there are always two options when we transfer data from location A to location B:

  1. Truncation and load: We transfer the data as a whole from location A to location B. If location B has some data already, we entirely truncate the location B and reload the whole data from location A to B
  2. Incremental load: We transfer the data as a whole from location A to location B just once for the first time. The next time, we only load the data changes from A to B. In this approach, we never truncate B. Instead, we only transfer the data that exists in A but not in B

When we refresh the data in Power BI, we use the first approach, truncation and load, if we have not configured an incremental refresh. In Power BI, the first approach only applies to tables with Import or Dual storage modes. Previously, the Incremental load was available only in the tables with either Import or Dual storage modes. But the new announcement from Microsoft about Hybrid Tables greatly affects how Incremental load works. With the Hybrid Tables, the Incremental load is available on a portion of the table when a specific partition is in Direct Query mode, while the rest of the partitions are in Import storage mode.

Incremental refresh used to be available only on Premium capacities, but from Feb 2020 onwards, it is also available in Power BI Pro with some limitations. However, the Hybrid Tables are currently available on Power BI Premium Capacity and Premium Per User (PPU), not Pro. Let’s hope that Microsft will change its licensing plan for the Hybrid Tables in the future and make it available in Pro.

I will write about Hybrid Tables in a future blog post.

When we successfully configure the incremental refresh policies in Power BI, we always have two ranges of data; the historical range and the incremental range. The historical range includes all data processed in the past, and the incremental range is the current range of data to process. Incremental refresh in Power BI always looks for data changes in the incremental range, not the historical range. Therefore, the incremental refresh will not notice any changes in the historical data. When we talk about the data changes, we are referring to new rows inserted, updated or deleted, however, the incremental refresh detects updated rows as deleting the rows and inserting new rows of data.

Benefits of Incremental Refresh

Configuring incremental refresh is beneficial for large tables with hundreds of millions of rows. The following are some benefits of configuring incremental refresh in Power BI:

  • The data refreshes much faster than when we truncate and load the data as the incremental refresh only refreshes the incremental range
  • The data refresh process is less resource-intensive than refreshing the entire data all the time
  • The data refresh is less expensive and more maintainable than the non-incremental refreshes over large tables
  • The incremental refresh is inevitable when dealing with massive datasets with billions of rows that do not fit into our data model in Power BI Desktop. Remember, Power BI uses in-memory data processing engine; therefore, it is improbable that our local machine can handle importing billions of rows of data into the memory

Now that we understand the basic concepts of the incremental refresh, let us see how it works in Power BI.

Implementing Incremental Refresh Policies with Power BI Desktop

We currently can configure incremental refresh in the Power BI Desktop and in Dataflows contained in a Premium Workspace. This blog post looks at the incremental refresh implementation within the Power BI Desktop.

After successfully implementing the incremental refresh policies with the desktop, we publish the model to Power BI Service. The first data refresh takes longer as we transfer all data from the data source(s) to Power BI Service for the first time. After the first load, all future data refreshes will be incremental.

How to Implement Incremental Refresh

Implementing incremental refresh in Power BI is simple. There are two generic parts of the implementation:

  1. Preparing some prerequisites in Power Query and defining incremental policies in the data model
  2. Publishing the model to Power BI Service and refreshing the dataset

Let’s briefly get to some more details to quickly understand how the implementation works.

  • Preparing Prerequisites in Power Query
    • We require to define two parameters with DateTime data type in Power Query Editor. The names for the two parameters are RangeStart and RangeEnd, which are reserved for defining incremental refresh policies. As you know, Power Query is case-sensitive, so the names of the parameters must be RangeStart and RangeEnd.
    • The next step is to filter the table by a DateTime column using the RangeStart and RangeEnd parameters when the value of the DateTime column is between RangeStart and RangeEnd.

Notes

  • The data type of the parameters must be DateTime
  • The datat tpe of the column we use for incremental refresh must be Int64 (integer) Date or DateTime.Therefore, for scenarios that our table has a smart date key instead of Date or DateTime, we have to convert the RangeStart and RangeEnd parameters to Int64
  • When we filter a table using the RangeStart and RangeEnd parameters, Power BI uses the filter on the DateTime column for creating partitions on the table. So it is important to pay attention to the DateTime ranges when filtering the values so that only one filter condition must have an “equal to” on RangeStart or RangeEnd, not both
Continue reading “Incremental Refresh in Power BI, Part 1: Implementation in Power BI Desktop”